Under Shelf Container Lid Rack — 5-Slot Cupboard Organiser

Tame the container-lid drawer. This under-shelf lid rack mounts flush to the underside of any wall cupboard and holds up to five food-storage container lids hanging vertically — Sistema, Lock & Lock, Tupperware, Snapware, IKEA, Addis and any other snap-lock or clip-lock plastic lids — freeing the drawer below for the containers themselves. Each lid slides down into its own slot between the fins and its side flip-clip drops onto a small S-shaped hook curl at the bottom, so it holds securely but lifts out with one finger. It arrives with double-sided adhesive pads already fitted — just peel the film and push it up against the roof of the cupboard, with no screws, drilling or damage. Dispatched from the UK.

Key Features

• Holds Up to 5 Container Lids: Five vertical fins form five upright slots along a compact horizontal rail — one lid per slot so you can find the right one at a glance instead of digging through a stack
• Under-Shelf Mounting: Mounts flush to the underside of any kitchen wall cabinet so the lids hang up out of the way, freeing the shelf or drawer below for the containers themselves
• Small S-Hook Catch: Each fin ends in a small S-shaped hook curl at the bottom — the lid’s side flip-clip slots in from below and the tail of the curl catches it so it can’t swing free when the cupboard door opens
• Fits Most Snap-Lock Lids: The narrow slot pitch and small open hook mouth accept the side flip-clips on Sistema, Lock & Lock, Snapware, Tupperware, Rubbermaid, IKEA and Addis-style food-storage container lids up to roughly 22 cm across
• Matte Grey Finish: Understated matte grey finish with a subtle textured surface — blends discreetly into a cabinet interior and hides fingerprints
• Pre-Applied Adhesive Pads — No Screws: Ships with strong double-sided adhesive pads already fitted to the flat top face — just peel off the protective film and press it up against the roof of the cupboard. No drilling, no screws and no damage to the cabinet
• Compact 120 mm Rail: A short 12 cm rail tucks into standard 30 cm / 40 cm / 60 cm wall cabinets without dominating the space — runs discreetly along one edge of the shelf
• UK Seller & UK Stock: Made and dispatched from the United Kingdom with tracked delivery

Specifications

Compatible With

Fits standard wall-cabinet interiors in fitted UK / EU kitchens, freestanding cupboards, larder units, and IKEA METOD, Howdens, Wren, Magnet, B&Q, Wickes and Homebase carcase depths. Designed around the side flip-clips found on Sistema, Lock & Lock, Snapware, Tupperware Modular Mates, Rubbermaid Brilliance, IKEA IKEA 365+ / PRUTA and Addis Clip & Close snap-lock food-storage lids — any lid with a thin side-tab or flip-clip that will drop into the ~3 mm open hook mouth.

What's in the Box

• 1 × Under-shelf container-lid rack (5 hooks + end-stop), with double-sided adhesive pads pre-applied

Easy to fit: the adhesive pads come already attached to the top of the rack — simply peel off the protective film and push it firmly up against the roof of the cupboard. No screws, no drilling and no damage to the cabinet. For the strongest bond, fit to a clean, dry, smooth surface and press for a few seconds.